Torpedo Live
What is the Torpedo Live?
The Torpedo Live is a speaker and microphone simulator. It makes the process of recording an amplifier easier. The classic way of recording an amplifier normally implies plugging the amplifier into a cabinet and recording the sound of that cabinet ...
Legacy Versions of Torpedo Remote, Wall of Sound and BlendIR
To perform firmware updates, or to keep using your Torpedo hardware or software alongside an outdated macOS or Windows operating system, you will need to install a legacy version of Torpedo Remote, Wall of Sound or BlendIR. Here are all the links you ...
Is Torpedo Live Mono or Stereo?
Torpedo Live is a Mono In / Mono Out device. On the S/PDIF digital output, 2 channels can be used; one channel is reserved for the dry signal (with no Torpedo processing), the other channel is reserved for the wet signal (with Torpedo processing). ...
How Does the Output Mode Work on Torpedo Live?
The output parameter can be accessed through the Setup Menu/Output (parameter 6/9) The Torpedo Live is a mono unit, but the S/PDIF digital output carries 2 channels: the Wet (with speaker simulation) or Dry (without speaker simulation) signal, or a ...
How Does the Fan in the Torpedo Live Work?
The fan in the Torpedo Live is controlled by the internal temperature monitor within the unit. The fan is turned on when the temperature reaches a threshold dependant on the room temperature and the power coming from the amplifier. The hotter the ...
How Does Overheating Protection Work on the Torpedo Live?
The Torpedo Live embeds a temperature-monitoring system and an active Security Load to prevent any and all damage that may be caused to either the user or product by overheating or by some improper use of the Torpedo Live with a guitar or bass ...
Does the Torpedo Live Simulate an Amplifier?
The Torpedo Live is not an amp simulator. It is a speaker-cabinet and miking simulator. It requires a guitar or a bass amplifier, allowing you to record that amplifier directly by simulating a cabinet and a microphone in a studio environment. It ...
Can I use Both the Line and Amp Inputs at the Same Time With the Torpedo Live?
With the Torpedo Live, it is not possible to use both Line and Amp inputs at once. On the Torpedo Live the Line input is designed to receive a guitar/bass preamplifier as a source and it gets physically activated by plugging in the Line — i.e. the ...
Can I Send Signal From the Torpedo Live Simultaneously to my PA and Speaker Cabinet?
Yes, the THRU, S/PDIF and LINE outputs can be used simultaneously. When you plug a cabinet to the THRU output, the impedance of this cabinet is the one that your amplifier sees. In other words, with a 4 Ohms cabinet, you need to connect the 4 Ohms ...
Can I Connect the Torpedo Live to an External Cabinet and Play at Low Volume?
Sadly, this is not possible without the use of an attenuator, such as the Torpedo Reload. The Torpedo Live provides you with a line output but no control over the cabinet volume that is connected to the THRU output (please check the manual for more ...