Torpedo Reload II | Impedance LEDs Lighting up Simultaneously
In some cases, you may notice all impedance LEDs on the front panel of Reload II lighting up in sync with your playing. This is an expected behaviour and not a hardware issue.
Reload II does not analyze or interpret signal content — The LEDs simply reflect certain electrical conditions at the input. When the signal feeding Reload II contains large amounts of high-frequency energy—common in heavily distorted tones—the additional harmonic content can momentarily cause all impedance LEDs to illuminate. The LEDs that do not correspond to the selected impedance may only glow very faintly.
Examples of signal conditions that can cause this behavior
- Using the amp’s distortion channel with TREBLE set very high and PRESENCE boosted
- Running a fuzz pedal into the amp’s bright channel, which emphasizes upper harmonics
This behavior is purely related to the electrical nature of high-frequency, high-harmonic signals and does not affect performance or indicate any fault.
Having issues?
Our support team is here to assist you! For any enquiries, please head over to our Help Desk and submit a ticket to speak directly to one of our in-house specialists.
Limited Service Notice
|
Please be advised, we are currently running a limited Help Desk Service from July 24th 2026 to August 4th 2026.
Rest assured, your enquiry is of the utmost importance to Two notes Audio Engineering and our support team are committed to resolving your enquiry as a matter of priority upon their return.
|
Related Articles
Torpedo Reload II | Does The Cabinet Impedance Need to Match the Input Impedance Of Reload II?
In Short, No. The impedance of the cabinet connected to a CAB output on Reload II does not need to match Reload II’s input impedance. Reload II’s input impedance only needs to match your amplifier’s speaker output impedance, not the cabinets ...
Torpedo Reload II | Using a Footswitch With Reload II ‘s FX Loop
Looking to control Reload’s II effects loop with a footswitch? Read on for our connectivity suggestions relating to this. Types of Compatible Footswitches Reload II’s FX Loop can be switched on and off with an external footswitch connected to the ...
Torpedo Reload II - The Celestion Approved Load Response
Response, Tone - they’re the bedrock of any performance, all rooted in a premier load-response that’s second-to-none. It’s this mantra that’s spawned Reload II’s all-new reactive load and the final word in next-generation Load Box technology. For ...
Torpedo Reload II - Reload II Source Compatibility FAQs
Whether it’s a Modeller, Fly-Rig, Amplifier or Amp Sim, Reload II is spec’d to deliver on any mandate. In the following help desk article, we outline what devices can be connected to the Input stage of Reload II through a series of ...
Torpedo Reload II | Stereo and dual cabinets setup
With two speaker (CAB) outputs, Reload II supports both dual-mono and stereo configurations from a mono source, whether it’s a tube amp or a pedalboard/modeler rig. Depending on the type of cabinet you connect, we recommend following the guidelines ...