Consideations regarding Reload II's output power

Torpedo Reload II | Connectivity and Powering On Procedure

To ensure safe and reliable operation of your Reload II, please follow the steps below when connecting and powering on your system. Incorrect powering on or connection sequences can result in damage to your amplifier or cabinet.

Step-by-Step Power On Procedure

  • Ensure Reload II is Powered OFF and any connected Amplifier or Line Level source is powered off
  • Connect Your Cabinet(s) into CAB OUT A and/or B on Reload II.
    • Important: Never hot-plug a cabinet. Connect or disconnect cabinets only when Reload II is powered off to prevent potential damage to Reload II’s internal power amplifier.
  • Connect the speaker output of your amplifier to the AMP IN on the Reload II; ensure the impedance setting on Reload II matches the impedance rating of the output tap on your amplifier
  • Ensure the CAB and OUTPUT volume controls on the front face of Reload II are set to their minimum position
  • Once all connections are securely in place, switch Reload II ON.
  • Finally, power on your amplifier or connected line level source.

Some Other Considerations to Bear in Mind

  1. Always double-check all connections before powering on any equipment.
  2. When shutting down, follow the reverse the order: amplifier off first, then Reload II

Having issues?
Our support team is here to assist you! For any enquiries, please head over to our Help Desk and submit a ticket to speak directly to one of our in-house specialists.



    GENOME CRASH

    Please follow the steps given in this article https://helpdesk.two-notes.com/portal/en/kb/articles/fix-genome-crashes-or-missing-components-with-the-genome-uninstall-utility

    For Windows user, please use the Uninstall Utility as an administrator ( right-click on the executable and select " run as administrator")





      • Related Articles

      • Torpedo Reload II | Power Output Optimization Tips

        Reload II’s continuous attenuation is achieved by pairing the reactive load box with a transparent solid state power amplifier. The built-in power amplifier is able to deliver the following (maximum) power in regards to the impedance of the connected ...

      • Torpedo Reload II | Stereo and dual cabinets setup

        With two speaker (CAB) outputs, Reload II supports both dual-mono and stereo configurations from a mono source, whether it’s a tube amp or a pedalboard/modeler rig. Depending on the type of cabinet you connect, we recommend following the guidelines ...

      • Torpedo Reload II - Using an External Cabinet Simulator with Reload II

        Looking to add a hardware Cabinet Simulator to your Reload II rig? Read on for our connectivity suggestions relating to this. Placement in Reload II’s Signal Chain In routine use of a tube amplifier, it is highly recommended that the power output of ...

      • Torpedo Reload II | Signal Path Overview

        The block diagram published inside Reload II’s manual provides a complete overview of the signal path within Reload II’s architecture. The following provides a comprehensive breakdown of the signal flow for both Amp and Line Level sources within our ...

      • Torpedo Reload II - Load Box Centric FAQs

        Featuring twin-channel operation, selectable multi-impedance compatibility and true continuous attenuation, Reload II is our most advanced Load Box to date. In this article, we summarise some key information relating to what a Load Box is, setup ...