MIDI Mapping in Revv® Amps

MIDI Mapping in Revv® Amps

Revv®’s Alpha and Pro amp range ship with Two notes Torpedo processing inside the amp. These amps feature MIDI connectivity for enhanced control of the on-board Torpedo-powered effects when using a MIDI controller.

For Alpha amps (D20, D40, G20, and D25), the Control Change (CC) MIDI mapping is the same for each amp.

The owner’s manual of the D20 details a comprehensive chart of CC commands (from page 17 onwards): https://cdn.shopify.com/s/files/1/0549/5852/2550/files/Revv-D20-Manual-2019.pdf?v=1685034180 

For the Pro amp series, the Control Change (CC) MIDI mapping is detailed in the relevant Revv’s owner manual:

  1. For the G120 (from page 18 onwards): https://cdn.shopify.com/s/files/1/0549/5852/2550/files/REVV-GENERATOR-120-MK3-MANUAL.pdf?v=1685034212 
  2. For the G100 (from page 18 onwards):https://cdn.shopify.com/s/files/1/0549/5852/2550/files/REVV-GENERATOR-100P-MK3-MANUAL.pdf?v=1685034212 
  3. The G50 will have a similar mapping as the G120 and the G100.

Note: when using the Pro amp series, it is only possible to turn on and off dedicated sections of the Torpedo through CC commands.

Having issues?

Our support team is here to assist you! For any enquiries, please head over to our Help Desk and submit a ticket to speak directly to one of our in-house specialists.





    Limited Service Notice
    Please be advised, we are currently running a limited Help Desk Service from 18th May 2024 to the 20th May 2024 (included). Our response time over this period will be slower than usual.
    Rest assured, your enquiry is of the utmost importance to Two notes Audio Engineering and our support team are committed to resolving your enquiry as a matter of priority upon their return to full staff.




      • Related Articles

      • Setting Up MIDI Control for OPUS

        OPUS features a MIDI input for full MIDI control of the pedal’s editable parameters via compatible MIDI controllers and switchers. In order to configure OPUS’s MIDI capability, please follow our guidelines below. First, connect the MIDI OUT of your ...

      • Using External MIDI hardware with GENOME

        For MIDI control of GENOME, use of your Digital Audio Workstation’s (DAW) MIDI control functionality is required for hardware control of those parameters exposed to your DAW as automation assignments.. Within GENOME, automatic and manual assignments ...

      • How to Register Your REVV®️ Amp?

        The Torpedo Remote software, a compatible computer and an internet connection are required in order to register your Revv® amp. When you register your Revv® amp, you will receive 2 additional complementary DynIRs, automatically assigned to your Two ...

      • Using Headphones With Your REVV® Amp

        A Torpedo Embedded REVV® Amp allows you to play your guitar rig silently and listen to it through headphones with the Torpedo cabinet simulation processing applied to your tone. The level of your headphones is principally controlled by the level and ...

      • Can I Use a Torpedo Product With a Transistor Amplifier ?

        The Torpedo product-line featuring a loadbox (Torpedo VB-101, Studio, Live, Reload, Captor, Captor X) can be used with amplifiers, as a direct replacement for a speaker cabinet. As you surely know, a speaker cabinet is not designed for a particular ...