How to use a Captor X / Captor with a Vox® AC10

How to use a Captor X / Captor with a Vox® AC10

The Vox® AC10 C1 has an External Speaker output at the back of the amp. It is rated at 16 ohms.
When it is connected to a cabinet or a load box, the internal speaker is muted.

Connect the Captor X (16) or the Captor 16 to the External Output of the Vox AC10 to use the amp silently and send the amp signal to your DAW or FOH.

Here is the owner's manual for the Vox AC10 for complete information on the amp's connectivity.

Having issues?

Our support team is here to assist you! For any enquiries, please head over to our Help Desk and submit a ticket to speak directly to one of our in-house specialists.




    Limited Service Notice
    Please be advised, we are currently running a limited Help Desk Service from the 13th to the 25th of August 2025.

    Rest assured, your enquiry is of the utmost importance to Two notes Audio Engineering and our support team are committed to resolving your enquiry as a matter of priority upon their return.

    If you have licence issues with our software, close the software then go to this page  https://www.two-notes.com/en/my-two-notes/?section=software
    Click on the RENEW button to renew your licence, and open the software again.

    If you are looking for the owner's manuals, please head to https://www.two-notes.com/en/user-manuals/.




      • Related Articles

      • It's Impossible to Connect Pedals/Multi-Effects to Captor X's SPEAKER IN

        Captor X is specifically engineered for amplifier use, accommodating both tube and solid-state designs. Connecting pedals, multi-effects, or devices producing a line-level signal from their output is not feasible. The signal's level (usually between ...

      • I Have a 4 Ohms Amp - Can I Use a Captor X With it?

        Yes, it is possible but you have to be careful. The speaker output of a tube amp is designed to be matched to one (or several) specific load(s). A 8 ohms speaker output is supposed to be connected to a 8 ohms speaker or load box. In some situations ...

      • Can I use my 120W amp with the Torpedo Captor X / Captor ?

        The Short Answer With a Torpedo Captor or Captor X, you can use an amplifier rated for more than 100W; however, a degree of caution is required specifically in ensuing the output volume of the companion amp is low enough. The Longer Answer All our ...

      • Which Headphones are the Best with Captor X?

        Captor X allows you to play your amp silently and monitor the resultant audio via compatible headphones. The level in the connected headphones is controlled by the OUTPUT LEVEL knob located on the front of the unit. In developing Captor X, we have ...

      • Gain Staging on the Captor X - the IN LEVEL Switch

        Captor X provides a load to an amp thanks to the built-in reactive load box; in addition, users can refine and sculpt their signature tone courtesy of the DSP-powered class-leading DynIR cabinet simulation and effects/processors. In a typical setup, ...