How to Register my Torpedo Live?

How to Register my Torpedo Live?

The Torpedo Remote software and an online computer are required to register your Torpedo Live to your Two notes account.

Here are the instructions to follow: 

  1. First, download the Torpedo Remote here and install it.
  2. Connect your device via USB and launch Torpedo Remote.
  3. You should arrive on the Welcome Window.
  4. If you do not have a Two notes account, press Sign Up.
  5. If you already have a Two notes account, press Sign In.
  6. You will then be asked whether you want to register your device to your account or not. Press Register to do so.
  7. Your Torpedo device is now registered to your Two notes account. The license file and your Two notes cabinets files will be automatically downloaded on the computer. When this operation is finished, a message window will inform you that the registration has succeeded.
  8. Follow the firmware update procedure if your device's firmware is out of date.

If you want to use Torpedo Remote on an offline computer, please read this article for more information "Install Torpedo Remote v5 on an offline computer" .

Having issues?

Our support team is here to assist you! For any enquiries, please head over to our Help Desk and submit a ticket to speak directly to one of our in-house specialists.





    Limited Service Notice
    Please be advised, we are currently running a limited Help Desk Service from 7th May 2024 to the 13th May 2024 (included). Our response time over this period will be slower than usual.
    Rest assured, your enquiry is of the utmost importance to Two notes Audio Engineering and our support team are committed to resolving your enquiry as a matter of priority upon their return to full staff.




      • Related Articles

      • Is Torpedo Live Mono or Stereo?

        Torpedo Live is a Mono In / Mono Out device. On the S/PDIF digital output, 2 channels can be used; one channel is reserved for the dry signal (with no Torpedo processing), the other channel is reserved for the wet signal (with Torpedo processing). ...

      • Does the Torpedo Live Simulate an Amplifier?

        The Torpedo Live is not an amp simulator. It is a speaker-cabinet and miking simulator. It requires a guitar or a bass amplifier, allowing you to record that amplifier directly by simulating a cabinet and a microphone in a studio environment. It ...

      • Can I Send Signal From the Torpedo Live Simultaneously to my PA and Speaker Cabinet?

        Yes, the THRU, S/PDIF and LINE outputs can be used simultaneously. When you plug a cabinet to the THRU output, the impedance of this cabinet is the one that your amplifier sees. In other words, with a 4 Ohms cabinet, you need to connect the 4 Ohms ...

      • Can I use Both the Line and Amp Inputs at the Same Time With the Torpedo Live?

        With the Torpedo Live, it is not possible to use both Line and Amp inputs at once. On the Torpedo Live the Line input is designed to receive a guitar/bass preamplifier as a source and it gets physically activated by plugging in the Line — i.e. the ...

      • How Does the Output Mode Work on Torpedo Live?

        The output parameter can be accessed through the Setup Menu/Output (parameter 6/9) The Torpedo Live is a mono unit, but the S/PDIF digital output carries 2 channels: the Wet (with speaker simulation) or Dry (without speaker simulation) signal, or a ...