Choosing a Power Supply for Your ReVolt Series Amp Sim

Choosing a Power Supply for Your ReVolt Series Amp Sim

Aside from the included Power Supply for your ReVolt pedal, there are a myriad of options out there that can be used to power the unit as part of your pedalboard rig. One important consideration to mention: the PSU supplied with your ReVolt Pedal is grounded, which lowers any picked-up ambient noise drastically compared to most 3rd-party power bricks - we therefore recommend using the included power supply for optimal performance.

Idle, the ReVolt pedal draws between 510 and 530mA depending on the channel that is instantiated. This goes up by 10-15mA when playing. That is why we decided to list 600mA on the silkscreen.

However, 3rd party power supply outputs are often slightly more capable than their published specifications and most multi-output bricks with a 12VDC / 500mA tap will power the ReVolt without a hitch.

The following 3rd-party power supplies have been noted as being compatible with the ReVolt Series Pedals:

  1. Cioks Sol
  2. Cioks DC7
  3. Voodoo Lab Power 3
  4. Voodoo Lab Power 3 Plus

Having issues?

Our support team is here to assist you! For any enquiries, please head over to our Help Desk and submit a ticket to speak directly to one of our in-house specialists.



    • Related Articles

    • Registering your ReVolt Guitar or ReVolt Bass and redeeming your DynIRs

      With your purchase of either a ReVolt Guitar or ReVolt Bass pedal, you are entitled to 10 DynIR virtual cabinets. To redeem the cabinets, please register your Analog Amp Simulator at the following page in your user account: ...
    • What Power Supply Do I Need for the Le Preamp Series?

      If you wish to use a power adapter other than the one provided with your Le Preamp pedal, here are the specifications that need to be adhered to: Voltage: 9V or 12V DC. The power supply needs to be Direct Current (DC); you cannot use an Alternating ...
    • Configuring ReVolt with your Amp's FX Return

      You can connect ReVolt Guitar or ReVolt Bass to a guitar/bass amp’s poweramp and enrich your ReVolt Series tone with your physical cabinet. To do so: Connect your guitar/pedalboard to ReVolt’s input (GUITAR IN) Connect the output of ReVolt (OUT) to ...
    • What Power Supply do I Need for the Le Series Preamp Pedals?

      If you wish to use a power adapter other than that provided with your Le Series Preamp Pedal, these are the specifications that need to be adhered to: Voltage: 9V or 12V DC. The power supply needs to be Direct Current (DC); you cannot use an ...
    • Using the ReVolt Series with Wall of Sound

      You can pair your ReVolt with our proprietary DynIRs using Wall of Sound for expanded tone shaping potential. With ReVolt Guitar or ReVolt Bass you are entitled to 10 expertly curated DynIR cabinets by registering the pedal to your Two notes account. ...