Can I Send Signal From the Torpedo Live Simultaneously to my PA and Speaker Cabinet?
Yes, the THRU, S/PDIF and LINE outputs can be used simultaneously.
When you plug a cabinet to the THRU output, the impedance of this cabinet is the one that your amplifier sees. In other words, with a 4 Ohms cabinet, you need to connect the 4 Ohms output of your amplifier to the Torpedo Live. In this configuration, the load box inside the Torpedo Live is disconnected. This way, you can override the 8 Ohms only limitation of the TORPEDO Live.
Having issues?
Our support team is here to assist you! For any enquiries, please head over to our Help Desk and submit a ticket to speak directly to one of our in-house specialists.
Limited Service Notice
|
Please be advised, we are currently running a limited Help Desk Service from 18th May 2024 to the 20th May 2024 (included). Our response time over this period will be slower than usual.
Rest assured, your enquiry is of the utmost importance to Two notes Audio Engineering and our support team are committed to resolving your enquiry as a matter of priority upon their return to full staff.
|
Related Articles
Is Torpedo Live Mono or Stereo?
Torpedo Live is a Mono In / Mono Out device. On the S/PDIF digital output, 2 channels can be used; one channel is reserved for the dry signal (with no Torpedo processing), the other channel is reserved for the wet signal (with Torpedo processing). ...
Does the Torpedo Live Simulate an Amplifier?
The Torpedo Live is not an amp simulator. It is a speaker-cabinet and miking simulator. It requires a guitar or a bass amplifier, allowing you to record that amplifier directly by simulating a cabinet and a microphone in a studio environment. It ...
Can I Connect the Torpedo Live to an External Cabinet and Play at Low Volume?
Sadly, this is not possible without the use of an attenuator, such as the Torpedo Reload. The Torpedo Live provides you with a line output but no control over the cabinet volume that is connected to the THRU output (please check the manual for more ...
Can I use Both the Line and Amp Inputs at the Same Time With the Torpedo Live?
With the Torpedo Live, it is not possible to use both Line and Amp inputs at once. On the Torpedo Live the Line input is designed to receive a guitar/bass preamplifier as a source and it gets physically activated by plugging in the Line — i.e. the ...
How Does the Output Mode Work on Torpedo Live?
The output parameter can be accessed through the Setup Menu/Output (parameter 6/9) The Torpedo Live is a mono unit, but the S/PDIF digital output carries 2 channels: the Wet (with speaker simulation) or Dry (without speaker simulation) signal, or a ...